Lexmark C752dtn

The Lexmark C752 offers 2400 Image Quality printing at up to 20 ppm in colour or black and is excellent for the medium to large workgroup.

Up to 20 ppm, and less than 17.5 seconds time to first colour page

True 1200 x 1200 dpi and 2400 Image Quality for best colour images and business graphics

85,000 page per month maximum duty cycle for short-run custom production printing

Colour Care Technology with ColourSaver™, 3 levels of colour and monochrome toner saver, Mono Only Driver, Black and White Lock and Proof then Print

Easy-to-replace high yield, single-element print cartridges for each colour

SWOP and EuroScale simulation color tables with Pantone Calibration for accurate color pre-press layouts

Ethernet Network-Ready with Duplex Unit and 500-Sheet Drawer standard

Related Products
Lexmark C752

Q. What happens when I use the ColourSaver™ Mode?

A. When ColourSaver is turned ON, text prints at a Toner Darkness setting of 4, while images and graphics print at a Toner Darkness setting of 1. This has the effect of making colour images and graphics lighter while retaining dark crisp mono text. It preserves the readability of documents while saving 50% on colour toner for images and graphics even if text, graphics, and images are all on one page.

Q. Tell me about the Lexmark Coverage Estimator.

A. The Lexmark Coverage Estimator uses an algorithm to count the picture elements (pixels) in the composite page to estimate the percent coverage for each colour, cyan, magenta, yellow and black. When the Coverage Estimator has been turned ON from the printer's operator panel Utility Menu, the calculated estimate is printed directly on to the page itself as it is printed. This handy tool allows you to quickly and easily determine the amount of cyan, magenta, yellow and black toner used on a given page, even in complex photographs and images. Understanding the cost of the page is then just a matter of a few simple calculations. The communication of content in many black and white documents can be improved for a nominal increase in cost when color is added. Of course, the Coverage Estimator is only an estimate of the coverage on a given page. For each toner color that is used, the minimum percentage reported will be two percent and reported values may vary from one printer to another. The accuracy of the estimates may be affected by the fullness of the print cartridges, environmental conditions, media type, application, application settings, driver, driver settings, and the content of the page. Lexmark makes no claim as to the accuracy of the estimated percents.

Q. What is Black and White Lock?

A. Black and White Lock is a setting in the Setup Menu that prevents color printing on that printer. All print jobs are completed using the black toner only. When this mode is enabled, it cannot be overridden by any other menu, driver, or application setting. This function simulates removing the color cartridges and running the printer with only the black cartridge installed.

Q. How does auto mode for Colour Correction work?

A. Auto mode for Colour Correction is ON when you receive your printer (default setting). Color Correction automatically selects the best colour correction mode from vivid, display or CMYK, based on the contents of the page you have sent to the printer. Auto mode is object, rather than page, oriented. So, it recognizes object types such as fill, text or image, and looks at how color was specified for that object, whether by RGB (red, green, blue); CMYK (cyan, magenta, yellow, black); gray, etc. It then applies the most appropriate colour correction for that object.

Q. What features does the Finisher offer?

A. The Finisher provides corner stapling, hole punching, offset stacking and an additional output bin. It supports up to 3,000 sheets of unstapled, un-punched media. It can staple up to a maximum of 30 sheets in each stapled set.

Q. How do I feed transparencies and cardstock?

A. Transparencies and cardstock can be fed through the 100-sheet multipurpose tray. This multipurpose tray supports up to 10 envelopes, 100 sheets of plain (20 lb. or 75 gsm) paper, 25 sheets of (80 lb. or 216 gsm) cover cardstock, 50 transparencies, and various other types of media. Transparencies and cardstock can also be fed from the primary 500-Sheet Tray. Lexmark recommends using official Lexmark Color Laser Transparencies for optimum results.